DC165 Session build

Once we got our hands on the ZMX X25 2522kv motors we knew they were destined for a good looking build. This ‘bit of blue’ has serious power with those 2206 motors pushed by Aikon 30A BLheli S ESC’s.

With a spare top plate included in the kit it’s a matter of seconds to fit or remove the Gopro session mount making it perfect for racing or capturing HD footage.

40mm standoffs offer plenty of room for all the camera tilt you need or to run it flat if you’re still learning or to try a bit of 3D flying.

At 274g this os actually lighter than our DC165 Micro, even with the heavier 2206 motors.

  • DC165 base plate
  • 1.5mm micro top plate
  • 40mm standoffs
  • Naze Rev5 FC
  • Matek PDB
  • 30A Aikon BLheli S ESCs
  • ZMX X25 2522KV motors
  • HS1170 Camera
  • Eachine ET25R VTX
  • Fatshark spironet antenna
  • DSMX Satellite Receiver
  • Dal 4045×3 props
  • Atto session mount

We recommend the Acehe 1500mah 4S 75C battery for this build.

Build weight – 304g (274g without session mount)