136-S

The micro revolution is here and it’s awesome!

The Atto 136-S is a ‘stretched -X’ 3″ frame designed around the new wave of micro components for a super light and strong racing build that is perfect for the track.

The stretched X design is favoured by many top pilots for several reasons. It offers super agile cornering and stable pitch control at high speeds as well as providing a clean air flow for the rear props. It’s perfect for high speed tracks and the with the right build can easily rival 4 and 5″ quads for speed whilst out corning them too.

Like all Atto frames the 136-S comes with Titanium frame bolts, colour matched alloy prop nuts, XT  battery connector and carbon prop spanner.

Atto 136-S frame-5

The 136-S is was developed specifically for the brand new BrainFPV 20mm flight controller and the Runcam swift mini CCD camera although any 20x20mm FC stack will fit with space for up to 4 boards (2x 2in1 ESC, FC and VTX). The smaller components allow a thinner frame and lower standoffs to be used, reducing drag and weight whilst increasing strength.

The 136-S accepts any motors from 1103 to 1707. We recommend a 1407 motor paired with 20A ESCS. Most small ESCS will fit on the the arms if required. There is no SMA  mounting option as the frame is intended to be used with a dipole or whip antenna. See the 136-S build log for details.

136-S kit includes:

  • 3mm 136-S base plate
  • 3mm Swift top plate
  • Alloy standoff kit
  • Titanium M3 bolts
  • Alloy M5 motor nuts
  • XT-30 connector
  • M5 Spanner / keyring

Bare frame weight with 3mm Swift plate plus alloy FC mounting hardware – 40g

Build shown with T1 1407 motors, Swift mini, Piko FC, Innova VTX and Maverick 24A ESCS – 162g