Building a 3″ quad can be tricky and sometimes your choice of components can leave the gaps between propellers and precious parts a little on the small side. If you need more clearance on your motors or want to raise the centre of gravity (when using the session mount for example) these motors risers will give the DC130 and 136-R frames a 3mm lift.
Alternatively the risers can be mounted underneath the arms for protection against landing scrapes. This is especially useful for flying on tarmac or rough surfaces. Mounting standard 1306 motors using the risers required 8mm M2 bolts.
Set of 4 x 3mm Carbon risers