Everyone likes to customise their quads but now you can add a personal touch to your fpv gear too. If you use the Furiousfpv True-D diversity receiver in your fatshark goggles you can now represent with the Atto custom startup logo.
This is the latest firmware version 2.1 for the V1. V2 and version 3.1 for the V3 True-D receivers.
For the V3 modules, updating is as simple as plugging in a USB cable. Owners of the V1 and V2 modules will require an FTDI adapter.
Click below to download the correct hex file for your module.
True-D V1 and V2 owners click here
If you’re not sure about flashing your receiver firmware watch the video below and make sure you’re confident before starting. These files are direct from furiousfpv and we cannot accept responsibility for you causing damage to your RX whilst upgrading.
Many thanks for the suggestions, I will try to take advantage of it.
LikeLike